debjit

192.168.0.1 is an IP address that is necessary to get access to the router settings or configuration. This IP address is a default address that is used by many router manufacturers.  You can even change it and use a different one. In the market, you will get various brands of routers that use a default IP address which needs to remain in a certain range and when you change this default IP address then it too needs to be in that range. Before diving into the core settings of the router management console, you need to have some basic information regarding what is router.

It is an electronic connection device that is used to process server and client requests throughout the network. All requests on the network are called packets and the router needs to dispatch those packets to their address. As there are many different brands of routers, there are also different router types. At first wire routers were popular and all systems needed to be connected through wire. But as requirements are high and flexible so with advanced technology Wi-Fi routers are developed. This IP address is a private address and every router’s default address differs in this address. That means whenever you want to change any settings of the router of any brand you need to login through its private IP address which might be 192.168.0.1.

Steps for router login page

Whenever you need to configure a network in any place you need to configure all its settings on the router. To change any settings you need to go to the router control panel or management console. To get access to the control panel you need to connect the router with a system through a LAN cable. Before connecting the router you need to check whether the LAN driver is present on your system.  If you have a LAN driver then connect the router through cable to the LAN port. If it is connected then a notification will generate on the bottom left corner of your desktop.

Now you have to open a browser and type the default IP address like http:// 192.168.0.1. If your connection is successful then it will load and open a login page of the router’s main control panel. On the login page, you need to enter the username and password of the router settings. The default username and password of routers are the same for many brands. You need to try using the username- Admin and Password-Password or both admin. If you are facing any problems then you can get help from the router manual book.

192.168.0.1 Wireless Settings

It is recommended that all the default usernames, passwords, and IP addresses be changed. Hackers might try to get access to your wireless network. If they get access to your router control panel then they can steal your valuable information on the network.  To keep all your information secure you must need to change the default router settings.

Change 192.168.0.1username and password

After successfully login to the control panel of the router you will be redirected to the settings page. On the left side of the page, you will get many options from where you need to click on Security. On clicking on security a new page will open where you need to enter your new username and password. The settings option might vary from router to router but the basics always remain the same. On some routers, you need to click on the security tab or setup tab.

On the left side, you will get many options, from the many clicks on the wireless or wireless settings. In the wireless settings, you can name your network of choice. Here you can also assign a new IP address for your network.  There will be many options on wireless settings, if you are a newbie then it is recommended not to alter any other settings. Different router brands come with different management consoles, but if you are familiar with any console then you can easily get familiar with others.

Readers, please check the content on A Complete Router Login Guide for Netgear, TP-Link, And Linksys, Asus, Belkin, Apple Airport, and Funny Wi-Fi names-Way to make your SSID Different.

Conclusion:

The router control panel is simple and to get access to its panel you need to have the private address and default login credentials. Every router control panel comes with lots of customization options which takes time to get familiar with. Never disclose your router control panel access credentials to others. It is recommended that you change your credentials after regular intervals as it ensures more security. We hope that the provided information will be of help to you. If you face further issues do leave a comment below and let us know.

Wi-fi has always been a great option for accessing the internet. We can see a marginal landmark opting for this service for its certain users to provide exceptional internet space. Most of the services are dominated by D-Link, Belkin, Asus, Cisco, Apple Airport, NetGear, Huawei, TP-Link, Linksys, etc, routers.  Most of them come with a default login username and password. So, without connecting to any of these asking you a login details then you can enter administrative details into it. Hence, if you wish for a password-protected Wi-Fi network then it should help you get into the available network.

We have been into this research to get you a complete router login guide for NetGear, TP-Link, Linksys, Asus, Belkin, Apple Airport, etc. Resetting your device or network setting will wipe out all remembered Wi-Fi networks. If you struggling to remember usernames and passwords, there here we going to share with you all available complete login guides for mostly used routers. So, facing problems to connect a password-secured Wi-Fi network should definitely help log into password-protected WiFi networks.

Complete Login Guide for All Routers

Knowing the router brand or manufacturer you can provide a login database and surf the internet connecting to the available Wi-Fi signal. The router brand and model can easily be found on the router itself. Depending on the router brand and model we are going to list out the default login database for all popular router devices.

But before you get into the Wi-Fi connection process, you may need to reset the router to the default setting. As you may come to know the given database for the Wi-Fi login guide going to be the default password and username. Make sure the router is on the default login interface and if it is not you should reset it to the default mode. So that, you will be able to use the login guide or login details from the list.

How to reset Router to Factory Settings?

Most of us change the router’s login database with the proper username and password to secure the network. But sometimes strong passwords could trigger difficulty for you as well. The convenient process is to reset your router and then you can again manage your router device with a default password and username. Every router does come with an easy Factory reset feature to restore all settings to default. Here is how to reset the router using the physical reset button below-

• To do so, first of all, power up your router device.
• Two types of Reset buttons, one is a physical button and another one is a Reset hole. Push and hold the Reset button for at least 5 seconds and the same with the other Reset hole using a paper clipper or pen tip.
• The LED light should blink after 5 seconds push and hold to the button or hole.
• After that, the router device should restart by itself.

Following the shown steps should revert your router’s login database to default. And now you can use any of the following login usernames and passwords for certain router devices such as TP-Link, NetGear, Belkin, Asus, Cisco, Linksys, Apple Airport, and much more. After completing the steps, here you all need to enter your Wi-Fi router admin interface.

Login Database for TP-Link, NetGear, Belkin, Asus, Cisco, LinkSys, Apple Airport

In case you are looking for your router’s default username and password then you can follow the below given list. Depending on your device brand and model the login guide may differ. Hence, to make it convenient, here are the default password and username.

• D-Link Username and Password List
• Asus Router Username and Password List
• NetGear Username and Password List
• Belkin Username and Password List
• Cisco LinkSys Router Username and Password List
• TP-Link Router Username and Password List
• And other mostly used Username and Password List

TP-Link Router Username and Password [Login Guide for TP-Link]

Asus Router Default Username and Password List [Asus Router Login Guide]

NetGear Router Default Username and Password [NetGear Router Default Login Guide]

Belkin Router Default Username and Password [Belkin Router Login Guide]

Cysco LinkSys Default Username and Password [LinkSys Default Login Database]

Conclusion

Now you have all the databases for all types of router login. Just make sure your router device is in default settings to get into the administrative interface. We have list out all of the default usernames and password for certain models. The router brands like TP-link, D-Link, Cisco Linksys, Asus, Belkin, Netgear, etc, all have been included in the list. So, without any wait restore to default setting your router to use these common passwords/usernames. However, after making it to the router admin interface, be sure to change your username and password to make your Wi-Fi network password-protected. Also, bookmark this page, so the in future if you forget your own wifi setup and then reset the device, this password can be used. Hope you like this detailed router login guide, then you can also check the next topic on 192.168.0.1 Login Page, Username, Password and Wireless settings, Funny Wi-Fi names-Way to make your SSID Different and Linksys Router Login & Modem Issue Fix.

For students project may be headache, as it includes lots of hard work and creative ideas which for a student may be difficult at beginning. Especially science and electronic projects are really very tough as you need to play with the circuits and create a new thing. Not only projects, as nowadays every school is taking part in hosting science fair, student really to be active in electronic projects. Here we have bought you the best electronic projects for school students. The projects that are mentioned here are very unique and are easy too, so that every school student can easily use the idea on their project or while representing in the science fair.

The projects here are like better security features for your house, electricity without generator, doorbell function and much more. So these are all, you can use these projects for every standard kids in school. So without wasting anytime let’s have a look at the best projects for school students that you can use in both school and science fair.

Best electronic project for school kids:

1. Doorbell function and making it musical: This is the simplest project that you can do for your school project. Here you will only need to do some simple circuit design and connect all with the UM66 which will produce the melodious music. Here in this project the main work is of the UM66 as this is the element which will produce melodic music when the doorbell is pressed and electric current is passed through the circuit. So this is the simplest project for you which you can represent in school, but make sure that this project is only for kids under fifth standard.
2. Security alarm of home: This is one of the interesting science projects and this is meant to be the high school science project. As everything used in this electronic project are on another level. You can make this project using all the cheap electronic material from the market. The only important thing used in this project is the invisible laser beam which detects the unknown sources and the alarm starts. You can use it on your home for getting rid of thieve and other stuffs. So this project is massive and this is the best one for high school science project or science fair and the best part is that it is very useful in practical life too. 
3. Circuit of emergency light at home: Yes, no doubt that LED bulbs consume less power and is very long lasting. But the main problem occurs when the powers shut down and there is no light at home. So in this project you are going to show how you can manage emergency lights on your house by using the power of sunlight or other natural resources. The science project is simple but it is also impressive at the same time, as it related to the practical daily life schedule.
4. Making Daylight at home: Daylight is very important for both office and home and this is the first step for saving electricity. In this project you show how to use sun light as bulb light at day time. Here there is no much work of circuit but only some few modifications in the roof top. Simple place aluminium foil canal in the top and place a glass plate on top, now connect the aluminium foil canal in the light which means the sunlight will glow in the bulb in the day light. This is also one of the simplest science projects which you can make for representing your school in any science competition. And the best part is that you will also spend less in this project, as there is not much material required in this project.
5. Lamp controlled by lamp: This is again a school electronic project for kids under fifth standard. The project is simple but is little complicated for kids as you will need to attach a IR receiver in the lamp and one in the remote control. Once the IR receiver receives wave from remote you can control the lamp light from the remote itself. So you can simply ON or OFF the lamp light from the remote itself.
6. High Voltage Cut Of School Project: Most of us are familiar with the problems of voltage variation. It is a big issue in every house and due to few reasons the voltage power supply may reach between 110v to 230 v and more. Running this high voltage of power supply may lead to direct damage into you house electric circuits. And we have come up with the diy electronic projects to get safety and protect from the over power of voltage consumption. It is a science project that is especially for the students of the middle school. The most important part of the high voltage cut off circuit is the Zener diode voltage regulator.
7. Water Overflow Indicator for Water Tanks: Water Tanks is one of the simplest electronics projects which are made available for the school students. It basically creates a “beep sound” at the moment when the water tank is filled up with water. This problem mainly helps to avoid the chance of over flow of water. One can simply get this school project straight to their house in a very less price that is $0.5. Water Overflow indicator will ignore the high chances of the wastage of water. Especially on the case when someone forgot to “Switch OFF” the power of the motor pump.
8. Water Low & High Level Detector Circuit: Water Low & High Level Detector Circuit is an extra project created for the high students. The objective of this project is to detect water level inside a water tank or any other water storage. This project is quite different from the rest of the project as compared from the list. It has the ability to figure out the absence or the presence of water into the tank. This project for the school is build using the BC548 transistors and a 7432 OR gate IC. If the level of the water goes up beyond its storage limit level then the circuit will create a “beep noise”.
9. LED Blinking Circuit: LED Blinking Circuit is a unique and simple circuit project for the school students. Into the project of the simple “LED Blinking Circuit” the 555 IC provide blinking effects to the LEDs and the “Astable Multivibrator” will create the continuous amount of pulses. The frequency is brought under the control by making the changes into the values of R1 or R2 and C1 as well. This project is very simple and is meant only for the school students. 
10. Water Empty Alarm project: Water Empty Alarm project allows you to learn the quantity of water present inside the water tank. It will also help you to know whether to turn on the water pump set or not.  You can use the water empty alarm as a project in school. It is very easy to build and simple by using some transistors. And this project is also known as the low water level alarm project.   

So these are the best electronic school project for kids, all of these projects are simple and is not that costly. You can represent these electronic projects on any science fair or at any of your school science project. All of these projects are very simple and is also very easy to make, so this is all if you are having any doubts then you can comment down relating any project topic you want to know.