Probability is high to see Device Descriptor Request Failed when you are using a Windows Product. Well, we know being here you are facing the same issue such as USB Device Not Responding issue when you are trying to insert a USB device. Device Descriptor Request Error is very common for Windows PC users. There could be several reasons behind USB detection failure. It could be issue in your USB drive and in your PC. You can easily figure out fault in your Pendrive or if it is PC then you might need to know some important tips to solve Device Descriptor Request problem.
First of all, you may need to find the exact reason behind it and concerning the issue you can fix USB Descriptor error. There are variety of solution for this issue regarding its proper issue. You don’t need to waste your time finding the solution manually. As we are going to share with you some important tips to fix Device Descriptor Request. From the various possible reasons, you can find the solution in below. So, if you struggling with the same USB Device Not Recognized error then the below given solutions might be helpful to you. So check them out and apply them accordingly to solve the issues that you are facing.
How to Solve Device Descriptor Request Error?
We have managed to list out the solutions accordingly. As already said, the issue can trigger for specific reason and without triggering it might be a hard drill to you. Relating to its specific reason it will be easier to handle the issuenow and in future. So, we are here digging into every matter to make it more convenient to know the issue behind it and fix Device Descriptor Request. Here are the pro tips to fix USB error.
Method 1: Uninstall Unknown USB Drivers
There are many unknown drivers get installed automatically after putting in USB Driver in your PC USB port. Unknown drivers in your system may trigger this kind of issue. Here is the tip to resolve USB error.
- First of all, Open system Run and in the box type “devmgmt.msc”.
After adding the command press Enter. - Device Manager window will pop-up.
- In the list menu click on Universal Serial Bus controllers.
- In here, you can see Unknown USB Device (Device Descriptor Request Failed).
- Now, hovering to it proceed mouse right click and ap on Uninstall.